2lb IWA Exploding Targets

LONG-RANGE SHOT INDICATOR, FOR EXPERIENCED USERS ONLY.

IMPROPER USE MAY RESULT IN SERIOUS INJURY, DEATH, FIRE AND OR PROPERTY DAMAGE.

MUST READ ALL INSTRUCTIONS BEFORE USE.

SAFETY PROTOCOL

Eye and ear protection REQUIRED for all personnel, maintain safe distance at all times, follow all local laws and safety regulations.

1. EMPTY CONTENTS

Remove the lid from the container. Open the foil catalyst packet and add the contents to the white granular material inside the container.

2. MIX THOROUGHLY

Secure lid and shake vigorously for 60 seconds until contents turn uniform gray. (Incomplete mixing may result in improper performance.)

3. DEPLOY TARGET

Position target in a clear, open area, free from obstructions and combustible materials.

4. ENGAGE TARGET

Fire at center mass using an appropriate rifle caliber from a minimum distance of 150 yards (137 meters).

PROHIBITED USE 

• Do NOT place targets inside, or near metal objects, vehicles, containers, structures or any rigid enclosures.
• Do NOT use near combustible or flammable materials do not use during any burn ban, fire restriction, or general fire order.
• Do NOT modify, alter, add substances to, or tamper with the components.
• Do NOT transport once mixed.

FIRE RISK NOTICE

This product is engineered to produce a shock-wave induced detonation and is not intended to initiate fire under proper conditions. However, external factors including:

• Improper mixing
• Improper placement
• Bullet fragmentation or sparks
• Environmental conditions (dry grass, heat, wind)
• Addition of foreign materials may create a fire hazard

Users assume all risks associated with environmental conditions and improper handling.

SAFE USE GUIDELINES

• Minimum recommended distance: 150 yards or greater.
• Elevate the target above ground level to reduce debris and fire risk.
• Use only in an open and safe shooting environment.
• For experienced users only.
• Store unmixed components in a cool dry location at room temperature.

Legal Notice: By mixing the components, you become the manufacturer of an explosive material and assume all responsibility and liability for its use. Must be mixed and used strictly for non-commercial purposes as a shot indicator in compliance with applicable federal regulations (including 27 CFR Part 555 or current applicable law). Always check and comply with all federal, state, county, and local laws, permits, and restrictions regarding possession, mixing, and use of binary targets.